Electric Dry Mix Shotcrete Machine Air Compressor Mini Shotcrete Machine

New Technology air compressor matched Dry Shotcrete Gunite Machine for mine

Dry Shotcrete Gunite Machine
 
Sealing Plate Turning and Grinding of Dry Shotcrete Gunite Machine:
In order to avoid the deformation of the old sealing plate in the repair process, a magnetic clamping plate or rigid fixed plate can be used to clamp the sealing plate to the lathe, the surface is turned with a carbide tool about 2 -- 3mm deep, until the deepest scars disappear. Then grind the rubber cover with a grinding device or a porous wheel for 2-3 times.
The steel bar portion must be about 2mm below the surface of the sealing plate.

 
Parameters of Dry Shotcrete Gunite Machine:

 
Operation Method of Dry Shotcrete Gunite Machine:
After the preparation work is finished, the mixing material can be added to the machine. The machine operator should first open the main valve, the valve of the upper air duct opens 1/3 circles, and then adjust the air pressure of the lower air duct (to the cyclone) to about 0.05-0.1 MPa (depending on the delivery distance). Then the sprayer opens the nozzle valve and gives the wet rock surface. At this time, the operator can start the machine and start shotcreting. Now the working pressure is about 0.2-0.4 MPa. According to the water-cement ratio of mixtures and the length of conveying distance, after adjusting and determining the wind pressure to the cyclone, the upper air pipe valve is opened again until there is no more material leakage at the machine outlet.

Pictures of Dry Shotcrete Gunite Machine:

Warehouse of Dry Shotcrete Gunite Machine: